Bosch WT PSI 6 Series, Technical Information

Page: 10 / 108

Safety instructions and reader’s information
Automationstechnik
VII
1070 080 086-101 (01.01) GB
Typographic conventions
General listing - Example: - The message is
displayed on the
screen.
Action
D
Example:
D
Insert floppy
D
Read value
Screen displays, Italics Example: Battery-Low
messages, displays Tip dress request
(Welding) parameters [in brackets] Example: [Weld time],
[Schedule].
Interface signals, keys, <key> Example: Press <F8>
command fields.
Inputs: Values, texts CAPITAL LETTERS
NOTE
Note concerning this manual: Black bars in the margin of a page indicate modifications
compared to the previous edition.
Proper use
The present manual contains information on the proper use of the weld timer type PSI
6XXX.190 W1.
In connection with the intended power supply and the specified welding equipment, the
weld timer type PSI 6XXX.190 W1
- serves for resistance welding of metals
- is suitable for operation in industrial environments in accordance with
DIN EN 50082-2 and DIN EN 50081-2 concerning electromagnetic compati-
bility (EMC).
The timer is not intended for any other use!
CAUTION!
The use for purposes other than the intended use may result in personal damage to the
user or third persons or damage to the equipment, the workpiece to be welded or environ-
mental hazards.
Therefore, our products should only be used for their intended purpose!
!