1
Safety instructions
The washing machine is heavy - take care when lifting.
Caution: frozen hoses can crack/burst. Do not install the washing machine outdoors or in
areas exposed to frost.
The washing machine could be damaged. Do not lift the appliance by protruding
components (e.g. the washing machine door).
In addition to the instructions provided in this document, special regulations from the
relevant water and electric utility companies may apply.
If in doubt, have a technician connect the appliance.
The worktop must have no openings in the area around the washing machine.
Route hoses and cables in such a way that there is no risk of tripping.
Environmentally-friendly disposal
Dispose of packaging in an environmentally friendly manner.
This appliance is labelled in accordance with European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment - WEEE.
The directive provides an EU-wide framework for the return and recycling of used
appliances.
Installation surface
The machine must be stable so that it does not move around.
The surface on which it is installed must be firm and level.
Soft floors/floor coverings are not suitable.
Installation using slider sheets
Slide sheets make it easier to slide the
washing machine into the installation recess.
Order using spare part no. 66 1827
Before sliding in the machine, dampen the slide sheets with a
mixture of water and detergent. Do not use any fat and/or oil.
Installation under a high-level worktop
-> Appliance dimensions, Page 3
Adjustment strips: order no. WZ 20470, WMZ 20470, Z 7090X0
Height adjustment kit: order no. WZ 20440, WMZ 20440, Z 7060X0
Installation on a pedestal
The front feet of the washing machine
must
be secured with holding brackets.
Order no. WMZ 2200, WX 975600, CZ 110600, Z 7080X0
Installation on a wood joist floor
If possible, place the washing machine in a corner.
Screw a water-resistant wooden plate (min. 30 mm thick) to the floor.
In doing so, take into account the height of the kitchen worktop.
The feet of the washing machine
must
be secured with holding brackets.
* Order no. WMZ 2200, WX 975600, CZ 110600, Z 7080X0
2
Scope of delivery
depending on model
Parts for assembly -> Page 8 - 13
Spanner
(depending on model)
Mains cable
Water inlet
Water outlet
Elbow
for securing the
water outlet hose
Covers
with hose clip
Aqua
ä
Stop
Aqua
ä
Secure
Standard
Hose clamp
for securing the water drain
hose ->
Page 5
or
Moisture inside the drum
is due to final testing.
ä
ä
ä
ä
ä
ä
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
a
ʑ
a
ʑ
ʑ
ʑ
ä
ä
