Intelligent dosing system
en
43
Notes
■
Reduce the basic dosage if using a
very concentrated detergent.
■
If large amounts of foam are
repeatedly created during washing,
please check your basic dosage and
dosage quantity settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage quantity settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
1.
Press and hold the corresponding i-
DOS control panel (
w
or
i
) for
approx. three seconds. The preset
base dosing quantity is displayed.
2.
Touch
N
or
M
to set the required
base dosing quantity. The setting is
activated without needing to be
confirmed.
3.
Touch the corresponding i-DOS
control panel again to return to the
initial status.
Note:
The settings are saved until
they are changed again, even if the
machine is switched off.
Manual dosage
For programmes in which intelligent
dosing is not possible or not requested
(then set intelligent dosing to "off"),
detergent is added to the left-hand
compartment.
Cleaning aids such as water softener,
bleach and stain remover can be added
to this compartment in addition to the
intelligent dosage.
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
