en
Home Connect
34
o
Home Connect
Home Connect
This appliance is Wi-Fi enabled and can
be controlled remotely via a smartphone
or tablet PC.
With the Home Connect app, you can
use your smartphone or tablet PC to do
the following on this appliance:
■
Select and start programmes.
■
Change programme settings.
■
Query the status of programmes.
■
Change appliance settings.
■
Switch off the appliance.
Before you can use the Home Connect
functions, you will need to install the
Home Connect app on your
smartphone or tablet PC, register,
connect your appliance automatically
or
manually to your home network (you
only need to do this the first time) and
then connect your mobile device to your
appliance via the Home Connect app.
You can find information about the app
on our Home Connect website
www.home-connect.com.
The availability of the Home Connect
function depends on the availability of
Home Connect services in your country.
Home Connect services are not
available in every country. You can find
more information on this at www.home-
connect.com.
Notes
■
Please observe the safety
precautions in this instruction
manual and make sure that these
are complied with even when
operating the appliance via the
Home Connect app while you are
away from home. You must also
follow the instructions in the
Home Connect app.
■
You cannot make changes in the
Home Connect app while the
appliance is in operation. You will be
able to use the Home Connect app
to see any adjustments made
directly on the appliance itself,
however.
Connecting to your home
network automatically
Step 2.1
If your router has a WPS function, you
can connect the appliance to your home
network automatically.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
1.
Switch on the appliance.
2.
Press and hold
Remote start
for at
least 3 seconds.
‘ž£
(connect automatically) will
appear on the display.
3.
Press Start/Pause
‹
to connect to
the network.
|
will flash on the
display.
The appliance will now try to connect to
your home network.
4.
Activate the WPS function on your
home network router within the next
2 minutes.
If the appliance has connected to your
home network successfully,
’©Ÿ
(connected) will appear on the display
and
|
will be lit continuously.
5.
Press
Remote start
briefly to exit the
Home Connect settings.
Note:
If you are not able to establish a
connection, check whether your
appliance is within range of your home
network.Try connecting automatically
again or connect your appliance
manually.