Operating the appliance
en
19
Changing the programme
If you have started the wrong
programme by mistake, you can
change it as follows:
1.
Press the
Start button
to cancel the
programme.
2.
Select a different programme.
3.
Press the
Start button
again. The
new programme starts from the
beginning.
Cancel the programme
1.
Press the
Start button
to cancel the
programme.
2.
To cool the laundry: Select the
Rinse
programme.
3.
Press the
Start button
again. The
Rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end during
$
Rinse Stop
The
$
Rinse Stop
(without final spin)
symbol appears in the display panel,
and the Start button indicator lamp
flashes.
To end the programme:
1.
Select the
Spin
or
Empty
programme.
2.
Press the
Start button
.
Programme end
The
-
‹
-
symbol appears in the display
panel, and the Start button indicator
lamp flashes.
If the
N
symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and has automatically
switched on a rinse cycle to remove the
foam.
Note:
Add less detergent to the next
washing cycle with the same load.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
Note:
If you cannot open the
washing machine door, the
appliance is still locked. Wait until
the programme has ended.
2.
Set the programme selector to the
Off
position. The appliance is
switched off.
3.
Turn off the tap.
Note:
Not required for AquaStop
models.
Scope of delivery
~
Page 28
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can evaporate.
■
Always remove the laundry.
■
Always wait until the programme has
ended, as the appliance could still
be locked.
