Operating the appliance
en
25
Select programme/switch on
the appliance
Use the programme selector to select
the programme you require. The
programme selector can be turned in
either direction.
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not saved when the
appliance is switched off.
Additional settings
Programme overview from
~
Supplementary sheet for the installation
and operating instructions
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with solvent-
based cleaning agents, e.g. stain
remover/cleaning solvent, may cause
an explosion after being loaded into the
washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■
Mix items of laundry of varying
sizes.Laundry items of different sizes
distribute themselves better during
the spin cycle.Washing laundry items
individually may result in an
unbalanced load.
■
Do not exceed the specified
maximum load. Overfilling the
appliance adversely affects the
washing result and encourages
creasing.
1.
Unfold pre-sorted items of laundry
before placing them in the washing
drum.
2.
Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal
when you close the door.
The indicator light of the Start button
flashes.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
