en
Sensors
28
H
Sensors
Sensors
Automatic load sensing
The automatic load sensing function
optimally adjusts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note:
Place large and small items of
).
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Risk of death!
There is a risk of electric shock if live
components are touched.
Switch off the appliance and pull out the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced from
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
■
Wipe the housing and the control
panel with a soft, damp cloth.
■
Do not use any abrasive cloths,
scourers or cleaning agents
(stainless-steel cleaners).
■
Remove the detergent residue
immediately.
■
Cleaning with a water jet is
prohibited.
Drum
Wipe the inside of the rubber seal dry
with a cloth. Leave the washing machine
door open so that the drum can dry.
Use chlorine-free cleaning agents; do
not use steel wool.
Note:
In order to keep the washing
machine clean, run it through on the
Cottons
90 °C
programme on a regular
basis.
Descaling
Note:
Make sure that there is no
laundry in the machine.
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
