background image

1 689 989 106

2012-09-10

Robert Bosch GmbH

 Symbols used  |  VLS 3130  |  21

en

1. Symbols 

used

1.1 

In the documentation

1.1.1 

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people 
in the vicinity. Warning notices also indicate the 
consequences of the hazard as well as preventive action. 
Warning notices have the following structure:

Warning 
symbol

KEY WORD – Nature and source of hazard!

Consequences of hazard in the event of 
failure to observe action and information 
given.

 

Hazard prevention action and information.

The key word indicates the likelihood of occurrence and 
the severity of the hazard in the event of non-observance:

Key word

Probability of 
 occurrence

Severity of danger if 
instructions not observed

DANGER

Immediate

 impending 

danger

Death

 or 

severe 

injury

WARNING

Possible

 impending

danger

Death

 or 

severe 

injury

CAUTION

Possible 

dangerous

 

situation

Minor

 injury

1.1.2 

Symbols in this documentation

Symbol Designation

Explanation

!

Attention

Warns about possible property damage.

i

Information

Practical hints and other  
useful information.

1.
2.

Multi-step  
operation

Instruction consisting of several steps.

e

One-step  
operation

Instruction consisting of one step.

 

Intermediate 
result

An instruction produces a visible 
intermediate result.

"

Final result

There is a visible final result on 
completion of the instruction.

DANGER – Exposure of live parts on 
opening the VLS 3130!

Risk of (fatal) injury or heart failure 
from electric shocks on contact with live 
components (e.g. master switch, printed 
circuit boards). 

 

Work on electrical installations or 
equipment is only to be performed by 
qualified electricians or trained personnel 
under the guidance and supervision of an 
electrician. 

 

Disconnect the VLS 3130 from the mains 
before opening.

Disposal

Dispose of used electrical and electronic 
devices, including cables, accessories and 
batteries, separately from household waste.

1.2 

On the product

 

!

Observe all warning notices on products and ensure 
they remain legible.

The transporting of persons on the lifting 
tables or in the vehicle is prohibited.

Notes on load distribution

The load center must be within the designated area.

Quick user guide

 

Safety instructions

 

Operation

 

Controls

 

Maintenance work

 

Load distribution

 

Approach direction

Summary of Contents for VLS 3130


















Reviews: