background image

1 689 989 106

2012-09-10

Robert Bosch GmbH

 24  |  VLS 3130  |  Product description

en

4.4 Inspection 

log

An inspection log is to be kept as a record of the lifting 
platform checks performed. The inspection log book 
must contain a report on the test performed prior to 
initial commissioning and the regular and exceptional 
checks, as well as the applicable certification on (EC) 
type testing and the EC declaration of conformity.

The report must include: 

 

The date and scope of testing with details of any test 
items not yet performed

 

The results of the test with details of any 
shortcomings established

 

An assessment of whether there are any 
impediments to start-up or further use

 

The details of any follow-up testing required

 

The name, address and signature of the person 
 carrying out the checks

 

i

The acknowledgement and rectification of any 
shortcomings found must be confirmed by the plant 
operator in the report.

5. Product 

description

5.1 Designated 

use

The type-approved lifting platform VLS 3130 is intended 
solely for the following use:

 

Lifting passenger cars or motor vehicles with the aid 
of two lifting tables.

The limit values for the lifting platform's load bearing 
capacity and load distribution must be observed.

The following regulations must be observed when 
starting up and operating lifting platforms:

 

Rules for lifting platform operation (BGR 500)

 

Basic principles for testing lifting platforms 
(BGG 945)

 

Rules for keeping the inspection log (BGG 945-A2)

The lifting platform is not to be used as a crane or as 
a support for other lifting mechanisms (e.g. block and 
tackle).

The lifting platform is designed such that people 
can stand under the loadbearing elements. It is not 
equipped to permit walking on the lifting platform or 
for conveying people.

Erection of the lifting platform is prohibited in 
explosion and fire hazard areas, outdoor areas and in 
damp atmospheres (e.g. washing shops).

The original operating instructions must be kept in 
a conspicuous, constantly accessible location near 
the lifting platform. All the above regulations must be 
heeded as well as the applicable rules on work safety 
and accident prevention.

Summary of Contents for VLS 3130


















Reviews: