© Bosch Healthcare Solutions GmbH
7
Instructions for use
Installation and setup
2
Installation and setup
2.1 Installing the analyser
Carefully unpack
the analyser from its box.
Place the analyser on
a flat surface
. Consider the operating
conditions described in chapter 8.
Remove the adhesive film pulling upwards from the front of
the analyzer.
Connect
to a power source.
Make sure to use the correct power supply cable for your
country.
After plugging in,
switch on
using the
power switch
on the back.
The analyser will start up.
Please wait until onboarding
starts automatically
.
• The analyser is for indoor-use only.
• Make sure that the power switch is accessible.
• Make sure to leave sufficient space for adequate air circulation.
• Do not grab or touch the scanner of the analyser.
2.2 Setting up the software – onboarding
When you start the analyser for the first time, you will be guided through a setup procedure.
Please follow the instructions displayed on the screen.
• Select the desired
language
by scrolling through the list of available languages.
• Continue to set the
date and time
.
• Afterwards set up an
administrator account
.
• Continue to set up a connection to
Vivasuite
for device management and software updates.
• At last press
finish
to
complete
the onboarding procedure.
Summary of Contents for Vivalytic
Page 1: ...Instructions for use ...
