VIP X1/VIP X2
| Installation and User Guide
EN
| 63
Bosch Security Systems | 2005-05 | V1.0
Configuration using a Web Browser
Relay follows:
For each number, enter the corresponding IP address for the desired remote
location.
]
Off
No relay triggering by events
]
Connection
Triggering if any connection is established
]
Video loss alarm
Triggering caused by loss of the video signal
]
Local input 1
Triggering by external alarm input 1
]
Remote input 1
Triggering by a relay contact at a remote location (only when a connection is
established)
Relay name:
The relay can be assigned a name here. The name will be shown on the button
next to
Trigger relay
. The Livepage can also be configured to display the name
next to the relay icon.
Trigger relay:
Click the button to switch the relay manually (for example for testing purposes
or to operate a door opener).
