Bosch TCE 4460, Original Instructions Manual, Page: 32 / 242

1 695 105 428 2010-02-16
|
Robert Bosch GmbH
32 | TCE 4460 | Initial commissioning en
652019-09_Mi
2000
1950
1250
500
500
Warning - damage risk!
The lifting belts can crush the flexible supply
pipes of the cylinder or damage the applied
parts of the TCE 4460
.
Insert the lifting belts carefully.
3. Remove the horizontal sliding arm plastic protec-
tions and the rear protection of the locking lever.
6520
16-01 _M i
652012-26_Mi
4. Insert the appropriate lifting belts (length belt 1: 1
Mt, belt 2: 3 Mt), with sufficient capacity, as shown.
652012-27_Mi
1
2
!
Warning - tilting danger!
The barycentre of the TCE 4460 does not lie
in its centre.
It is necessary to lift the machine slowly.
5. Lift the TCE 4460 with a lift crane and install it in the
designed area respecting the minimum distances as
shown in the picture.
i
For safe and ergonomic use of the TCE 4460 it is
recommended to leave a minimum of 500 mm space
from the surrounding walls.
Warning - tilting danger!
During tire inflation considerable forces are
exerted.
The TCE 4460 has to be fixed in at least 3
points on the floor (screw holes see chap.
4.2)..
i
In each screw hole are placed shock absorbers, to
allow a vibration free installation .
6. Pre-arrange a suitable lubricator in the lubricator
holder bulb.