1 695 600 539
2016-07-22
|
24 | Start Line WBE 260 | Symbols used
en
1.3
Safety Instructions
Please read the manual before operation.
Please wear eye protection
.
Rotating equipment, exercise caution.
1. Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word
Probability of
occurrence
Severity of danger if in-
structions not observed
DANGER
Immediate
impend-
ing
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on com-
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
Information on the rating plate
Product designation, 10-digit material number; volt-
age (V), setting (Hz), installed load (kW); current (A),
maximum supply pressure (kPa), protection class (IP);
year of manufacture; CE mark; 13-digit material num-
ber and machine model; barcode.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Prescribed voltage supply
Information on the voltage set and safety warning.
DANGER – Exposure of live parts on open-
ing the WBE 260!
Risk of (fatal) injury or heart failure from
electric shocks on contact with live compo-
nents (e.g. master switch, printed circuit
boards).
¶
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
¶
Disconnect the WBE 260 from the mains
before opening.
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter "Checking the direction of
rotation")
