CC404
|
Operators Guide | 23.0
Glossary of Terms
Bosch Security Systems | 7/05 | F01U009494B
19
23.0 Glossary of Terms
Table 15: Glossary of Terms
Term Description
24-Hour Zones
A monitored input programmed to activate an alarm, if violated, if the system is
armed or disarmed.
Alarm
Your system is armed and one of the detection devices was violated. A 24-hour
zone (such as a smoke detector) can activate an alarm when your system is armed
or disarmed.
Answering Machine
Bypass
When answering machine bypass is used, you can connect to the system for
remote arming operations when there is an answering machine or facsimile machine
connected to the same telephone line.
Armed
The system is in a ready state to accept alarms.
Automatic Arming
The system is automatically armed in AWAY Mode or STAY Mode 1 at the same
time every day.
Automatic Disarming
The system is automatically disarmed at the same time every day.
AWAY Mode
Used to arm your system when you leave your premises.
Codepad
The device used to arm and disarm the system, and to execute other functions such
as adding and deleting system user codes.
Day Alarm
Monitors a combination of zones when the system is disarmed.
Detectors
Devices connected to your system that detect intrusion or fire, and activate an
alarm. Some forms of detection devices include passive infrared (PIR), smoke
detectors, photoelectric beams, reed switches, and vibration sensors.
Disarmed
A state in which the system does not accept alarms, except from zones
programmed for 24-hour operation.
Dynamic Battery
Testing
Monitors and tests the condition of your backup battery.
Entry Time or
Entry Delay
The time allowed by a zone to disarm the system after you enter your premises.
External Equipment
Any devices connected to your system such as detectors, codepads, and sirens.
Forced Arming
Enables you to arm your system even though one or more zones are unsealed.
Handover Delay
The system is armed and a zone programmed for delay was violated. The delay zone
hands over the remaining delay time to a zone programmed as handover. The
handover zone does not activate an alarm until the remaining delay time expires. A
handover zone acts as an instant zone if it is violated before the delay zone.
Remote Control
Used to remotely operate your system using hand-held transmitters (keyfobs).
Isolating
Manually disable (isolate) one or more zones before arming the system.
Master Code
A code used to arm and disarm the system and to allow access to functions such
as adding and deleting user codes.
Monitoring Station
A secure location where a digital receiver monitors a number of alarm systems and
deciphers their Alarm Transmission Reports. The station operator can then advise
the appropriate authorities to take immediate action.
Panic Alarm
Type of alarm that indicates to the monitoring station there is an emergency
situation at your premises.
Sealed
Refers to zone status. If a zone is sealed, the detection device is not violated and
the zone indicator is not lit on the codepad.
Sensor Watch
The ability of the control panel to recognise that detection devices might have
stopped working or that the view to a PIR detector is blocked (it is unable to detect
any movement during the time programmed by your installer).
