Set First Test Report
1.
Enter the Installer Code followed by 2 and the
key [eg. 1234 + 2 + #].
2.
Enter the Number Of Days (0 - 99) to wait
until first test report followed by the # key.
Event Memory Recall
1.
Enter the Installer Code or Master Code
followed by 3 and the # key.
[eg. 1234 + 3 + #].
The last 40 events (non partitioned) or last 10 events
(partitioned) will be displayed in reverse order (i.e.
most recent to least recent).
Walk Test Mode
1.
Enter the Installer Code or Master Code
followed by 4 and the # key.
[eg. 1234 + 4 + #].
2.
Test each zone as required.
3.
Press the # key to exit.
Satellite Siren Service Mode
1.
Enter the Installer Code followed by 5 and the
# key [eg. 1234 + 5 + #].
Telephone Monitor Mode (Toggle On/Off)
1.
Enter the Installer Code followed by 7 and the
# key [eg. 1234 + 7 + #].
2.
Press and hold the 9 key until two beeps are
heard to send a test report.
3.
Repeat Step 1 to turn telephone monitor
mode off when complete.
Zone LED
Dialling Event
1
Telephone Line Seized
2
Dialling Telephone Number
3
Handshake Received
4
Data Being Sent
5
Kiss-Off Received
None
Released Telephone Line
Add A User Code
1.
Enter the Master Code followed by 1 and the
# key [eg. 2580 + 1 + #].
2.
Enter the User Number that you want to
add/change followed by the # key.
3.
Enter the New Code followed by the # key.
Delete A User Code
(V1.10)
1.
Enter the Master Code followed by 1 and the
# key [eg. 2580 + 1 + #].
2.
Enter the User Number that you want to
delete followed by the # key.
3.
Press the # key again to delete the user code.
Delete A User Code
(V1.20+)
1.
Enter the Master Code followed by 1 and the
# key [eg. 2580 + 1 + #].
2.
Enter the User Number that you want to
delete followed by the # key.
3.
Press the * key to delete the user code.
Change Domestic Telephone Numbers
1.
Enter the Master Code followed by 2 and the
# key [eg. 2580 + 2 + #].
2.
Enter the digits for the telephone number.
3.
If more than one telephone number, press the
* key and repeat Step 2, else press the # key
to exit.
Turn Outputs On/Off
1.
Enter the Master Code followed by 5 and the
# key [eg. 2580 + 5 + #].
2.
Enter the Output Number (1 – 5) that you
want to toggle on or off.
3.
Press the # key to toggle On or the * key to
toggle Off.
4.
Press the # key to exit.
Setting Date and Time
1.
Enter the Master Code followed by 6 and the
# key [eg. 2580 + 6 + #].
2.
Enter the day (DD), month (MM) and year
(YY) followed by the hour (HH) and minute
(MM).
3.
Press the # key to exit.
6
Solution-16/Solution-16
Safecom
Quick Reference Guide
SOL 16 SAFECOM QUICK REF GUIDE.DOC.DOC
Bosch Security Systems Pty Limited
