Softening SystemNL
1.
Open the lid of the softening salt
reservoir and remove it.
According to the manufacturer's
instructions, you can only use
dishwasher detergents with salt
substitutes up to a degree of
hardness of 21 °dH without adding
softening salt.
†The water hardness is 0 - 6
°dH. You do not need to use
softening salt.
2.
When using for the first time: fill the
reservoir completely with water.
3. Note:Only use dishwasher
softening salt.
Do not use salt tablets. Do not
use table salt.
Place the softening salt in the
softening salt reservoir.
1.
Press.
2.
Approx. 3 seconds on
to access the basic settings.
Busy-
aThe display shows Hxx. aThe
display shows
reflected
to give.
3.
Just as often on
the display shows H00.
press until
4.
To save the settings, press . for
about 3 seconds
to press.
aThe water softener has been
switched on and the refill
softener salt indicator is
deactivated.
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
Regenerate the softening
system
4.
Fit and close the lid of the
reservoir.
In order to maintain trouble-free
operation of the water softening system,
the device regularly performs a
regeneration of the water softening
system.
The softening system is regenerated in
all programs before the end of the
main wash cycle. This increases the
running time and consumption values
of, for example, water and electricity.
Switch off water softening
If the refilling salt indicator bothers
you, for example if you use a
combined dishwasher detergent with
a salt component, you can switch off
the softening salt indicator.
Remark
To avoid damage to the
appliance, only switch off the
water softener in the
following cases:
†The water hardness b
times 21 °dH and you
combine dishwashing
salt replacement st
wears maxi-
uses a
remedy with
offend. combined
25
