en
Detergent
26
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
4.
Close the lid of the dispenser for
rinse aid.
a
The lid clicks into position.
12.2 Setting the amount of
rinse aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
1.
Press .
2.
Hold programme button A and
press
repeatedly until the dis-
play shows H:xx.
3.
Release programme button A and
.
a
Programme button A flashes and
the display shows H:04.
4.
Press programme button A re-
peatedly until the display shows
the value set at the factory r:04.
5.
Press programme button C re-
peatedly until the right amount of
rinse aid has been set.
– A low setting adds less rinse aid
during the wash cycle and re-
duces streaking on tableware.
– A higher setting adds more
rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.
6.
Press
to save the setting.
12.3 Switching rinse aid sys-
tem off
If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.
Tip:
The function of rinse aid is lim-
ited with combined detergents. You
will generally get better results using
rinse aid.
1.
Press .
2.
Hold programme button A and
press
repeatedly until the dis-
play shows H:xx.
3.
Release programme button A and
.
a
Programme button A flashes and
the display shows H:04.
4.
Press programme button A re-
peatedly until the display shows
the value set at the factory r:04.
5.
Press programme button C re-
peatedly until the display shows
r:00.
6.
Press
to save the setting.
a
The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.
13 Detergent
13.1 Suitable detergents
Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
Special salt →
Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
