Bosch SKE52M75EU User Manual Download

Page: 46 / 56

Troubleshooting

Fault

Cause and troubleshooting

Excessive formation of
foam occurs.

▶

Remove the rinse aid with a cloth.

Detergent or appliance care product used causes ex-
cessive foaming.

▶

Change the brand of detergent.

Fault

Cause and troubleshooting

Special salt refill indic-
ator lights up.

Insufficient special salt.

▶

Add Special salt →

Page 23

Sensor does not detect special salt tablets.

▶

Do not use special salt tablets.

Refill indicator for spe-
cial salt does not light
up.

Water softening system is switched off.

▶

Setting the water softening system →

Page 23

Refill indicator for
rinse aid lights up.

Insufficient rinse aid.

Add Rinse aid →

Page 25

Set the amount of rinse aid to be dispensed.

Refill indicator for
rinse aid does not
light up.

Rinse aid system is switched off.

▶

Set the amount of rinse aid to be dispensed.
→

"Setting the amount of rinse aid", Page 26

→

"Setting the amount of rinse aid", Page 26

Fault

Cause and troubleshooting

Water is left in the ap-
pliance at the end of
the programme.

Filter system or area under the filters is blocked.

Clean the Filters →

Page 35

Clean the Wastewater pump →

Page 49

Programme has not yet ended.

▶

Wait until the programme ends or cancel the pro-
gramme with

Reset

▶

→

"Terminate programme", Page 32

Appliance cannot be
switched on or oper-
ated.

Appliance functions have failed.

Pull out the mains plug or switch off the fuse.

Wait at least 2 minutes.

Connect the appliance to the power supply.

Switch the appliance on.

Appliance does not
start.

The mains fuse has tripped.

▶

Check the relevant fuse.

Mains cable is not inserted.

Check whether the socket works.

Summary of Contents for SKE52M75EU

























































Search results

Summary of Contents for SKE52M75EU

Reviews:

Related manuals for SKE52M75EU

Brands by name

Popular brands

Bosch SKE52M75EU, User Manual

Search results

Summary of Contents for SKE52M75EU

Reviews:

Related manuals for SKE52M75EU

Brands by name

Popular brands