Troubleshooting
en-us
45
Issue
Cause and troubleshooting
Dishware is not dry. Dishware removed too early or drying process not
yet ended.
1.
Wait until the program ends.
2.
Only remove dishware 30 minutes after the
program has ended.
Rinse aid used has a limited drying performance.
▶
Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware is not
dry.
Silverware not arranged properly in the silverware
basket or silverware drawer.
Droplets can form on the contact points of silver-
ware.
1.
Arrange silverware individually where possible.
2.
Avoid points of contact.
Appliance interior
still wet after wash
cycle.
Not an error. Condensation drying creates water
droplets in the tub. This is normal. Moisture in the
air condenses on the inside walls of the appli-
ance, runs off, and is pumped out.
No action required.
Food remnants on
dishware.
Dishware was placed too close together or rack is
overfilled.
1.
Arrange dishware with sufficient space in be-
tween.
The spray jets must reach the surfaces of the
dishware.
2.
Avoid points of contact.
Spray arm rotation is blocked.
▶
Arrange dishware so it does not obstruct spray
arm rotation.
Spray arm nozzles are blocked.
▶
Filters are dirty.
▶
Clean the filters.
Filters are inserted incorrectly and/or not en-
gaged.
1.
Insert the filters properly.
2.
Twist filters into place.
Selected wash cycle is too light.
▶
Select a more intensive cycle.
Summary of Contents for SHV78B73UC
Page 63: ......
