Bosch SHV78B73UC, Use And Care Manual

Page: 44 / 64

en-us
Troubleshooting
44
Issue Cause and troubleshooting
A different error
code appears in the
display window.
E:01-00 to E:90-10
There is a technical issue.
1.
Press .
2.
Pull out the power cord plug of the appliance or
switch off the breaker.
3.
Wait at least 2 minutes.
4.
Insert the power cord plug of the appliance in a
power outlet or switch on the breaker.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press ⁠.
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service →
Page 55
and
give the error code.
Dishware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid →
Page 24
.
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 25
Cycle or cycle option has no drying phase, or dry-
ing phase is too short.
▶
Select a wash cycle with drying. →
Page 15
Some option buttons decrease the drying re-
sult.
Water collects in recesses of dishware or silver-
ware.
▶
Position dishware at an angle where possible.
The combined detergent used has a poor drying
performance.
1.
Use rinse aid to improve drying performance.
2.
Use a different combined detergent with a bet-
ter drying performance.
Extra Dry not activated to improve drying perfor-
mance.
▶
Activate Extra Dry.