Basic Operation
en-us
29
Requirements
¡
Pressing Start to begin a wash
cycle
¡
Setting Delay time and press-
ing Start
¡
Opening the door while Delay
time is active
¡
Opening the door during a
wash cycle.
1.
Close the door.
2.
Press
.
a
The wash cycle will resume.
13.2 Switching on the
appliance
▶
Press
.
The program last selected and
the additional function last se-
lected will be set by default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
13.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable programme.
▶
Press the right cycle button.
a
The cycle is set and the cycle
button flashes.
a
The remaining run time of the
cycle appears on the display.
13.4 Setting options
You can set options to complete
the chosen wash program.
Note: The available options de-
pend on which program is se-
lected.
▶
Press the button for the rele-
vant option.
a
The option is set and the option
button flashes.
13.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
1.
Press
.
a
"h:01" appears on the display.
2.
Use
to set the required
start time for the wash cycle.
3.
Press
.
a
This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
repeatedly
until "h:00" appears on the dis-
play.
13.6 Starting the wash
cycle
▶
Press
.
a
The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡
If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡
You can only change a cycle in
progress if you can cancel it
first.
¡
To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
Summary of Contents for SHE53B75UC
Page 59: ......
