15
BOSCH
* Model dependent
EN
gl
ISH
Before using your appliance for the
first time
Remove any label or protective cover from
the soleplate (7).
During it first use the iron may produce certain
vapours and odours that will die away after a few
minutes.
Using your appliance
1. Filling the water tank
See the leaflet sides
This appliance has been designed to use normal
tap water.
• The addition of other liquids, (unless
recommended by Bosch) such as perfume,
will damage the appliance.
• Do not use condensation water from tumble
dryers, air conditioning systems or similar.
Any damage caused by the use of the
aforementioned products will make the
guarantee void.
E
Set the steam regulator (3) to the
position and unplug the iron from the
mains!
1. Open the water inlet lid (5).
2. Fill the water tank (11).
Never fill beyond the
level mark for maximum filling (8).
3. Close the water inlet lid.
☞
Tip:
To prolong the optimum steam
function, you may mix tap water with
distilled water 1:1. If the tap water in your
district is very hard, mix tap water with
distilled water 1:2.
You can inquire about the water hardness
with your local water supplier.
2. Setting the temperature
See the leaflet sides
The temperature control (12) adjusts the
temperature of the soleplate (7).
Set the temperature control to the corresponding
position by lining it up with the temperature index
(9) on the iron.
Temperature Suitable for :
●
synthetics
●●
silk – wool
●●●
cotton
max
linen
i-Temp*
any type of fabric which can be
ironed
AntiShine*
dark and delicate fabrics.
Reduces the risk of shiny
marks.
2.1 “TempOK” indicator
While the soleplate is heating up or cooling down
to the selected temperature, the “TempOK” lights
inside the temperature control (12) will flash.
When the selected temperature is reached, the
lights will stop flashing and remain lit
continuously.
2.2 “i-Temp” function *
If this function is selected, an appropriate
temperature is set which is suitable for all fabrics
that can be ironed.
The “i-Temp” function prevents clothes from
becoming damaged due to an unsuitable
temperature being selected.
The “i-Temp” function does not apply to
fabrics that cannot be ironed.
Please check
the garment care label for details or try ironing
on a part of the fabric not visible normally.
When the “i-Temp” function is selected, the blue
light inside the temperature control comes on.
