19
BOSCH
* Model dependent
EN
gl
ISH
Trouble shooting
Problem
Probable cause
Solution
The iron does not
heat up.
1. Temperature control (12) set to
minimum.
2. The “SensorSecure” system has been
activated. The iron is set to stand-by.
1. Turn to a higher position.
2. Grip the handle of the iron to re-start
it.
The “TempOK”
lights inside the
temperature
control (12) flash.
1. The soleplate (7) is heating up or
cooling down to the selected
temperature.
1. This is normal and lights will stop
flashing when the selected
temperature is reached.
The clothes tend
to stick
1. The temperature is too high.
1. Turn the temperature control (12)
down and wait until the iron has
cooled down.
Water drips out of
the soleplate (7)
together with
steam.
1. Temperature control (12) setting is too
low.
2. Steam regulator (3) is set too high in
conjunction with a low temperature.
3. You have pressed the shot of steam
button (2) repeatedly without waiting
for 5 seconds between each press.
1. Turn the temperature control (12) to a
higher setting and wait until the
“TempOK” lights inside the
temperature control stop flashing and
remain lit continuously.
2. Set the steam regulator (3) to a lower
setting.
3. Wait 5 seconds between each press
of the shot of steam button.
Steam does not
come out.
1. Steam regulator (3) is set to
position.
2. The temperature is too low. Anti-drip
system is activated.
1. Set the steam regulator to a higher
position.
2. Set to a higher temperature if
compatible with the fabric.
Smoke comes out
when connecting
the iron for the first
time.
1. This may be caused by the lubrication
of some of the internal parts.
1. This is normal and will stop after a
few minutes.
Excessive dripping
or steaming.
1. No proper closing of “Calc’nClean”
system.
1. Actuate a few times the “clean”
button (10).
Deposits come out
through the holes
in the soleplate
(7).
1. Traces of lime scale are coming out of
the steam chamber.
1. Carry out a cleaning cycle
(see “Calc’nClean” section).
If none of the above solves the problem, get in touch with an authorised technical service.