Bosch sensixx B10L Series, Operating Instructions Manual

Page: 17 / 132

17
B O S C H
EN
G
lI
SH
The fabric-protection soleplate cover may
be purchased from the customer service or
specialist shops:
Accessory code
(After-sales)
Name of accessory
(online shop)
571510 TDZ2045
464849* TDZ1520*
* Cork handle iron.
advice on disposal
Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the
local waste disposal service as secondary raw
materials. Your local town council can give you
information about how to dispose of obsolete
appliances.
This appliance is labelled in
accordance with European
Directive 2002/96/EG concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
The guideline determines the framework for
the return and recycling of used appliances as
applicable throughout the EU.
Tips to help
you save energy
Steam production consumes the most energy.
To help minimise the energy used, follow the
advice below:
• Start by ironing the fabrics that require
the lowest ironing temperature. Check the
recommended ironing temperature in the
label on the garment.
• Try to iron the fabrics while they are still
damp and reduce the steam setting.
• If you tumble dry your fabrics before ironing
them, set the tumble drier on the ‘iron dry’
programme.
• If the fabrics are damp enough, you can iron
without steam.
3. If the soleplate is soiled with dirt or scale,
clean it with a damp cotton cloth.
4. If the cloth is synthetic, it may melt due to
the high temperature on the soleplate (14).
Switch off the steam and rub off any residue
immediately with a thickly folded, dry cotton
cloth.
5. Never use abrasive products or solvents. To
keep the soleplate (14) smooth, you should
avoid hard contact with metal objects. Never
use a scouring pad, or chemicals to clean
the soleplate.
D
Storing the
appliance
1. Set the main power to the “0” position and
disconnect the mains cable.
2. Always allow the appliance to cool down
before storing it.
3. Place the iron on the iron pad, standing on
the soleplate.
4. Empty the boiler and store the mains
cable and the steam hose in the storage
compartment. Do not wrap the cords too
tight.
5. Use the carrying handles (17) on the sides
when moving the appliance.
E
Fabric protection
soleplate cover
(model dependent)
The fabric-protection soleplate cover is
used for steam-ironing delicate garments
at maximum temperature without damaging
them. Use of the soleplate cover also does
away with the need for a cloth to prevent shine
on dark materials.
It is advisable to irst iron a small section on
the inside of the garment to see if it is suitable.
To attach the soleplate cover to the iron, place
the tip of the iron into the end of the soleplate
cover and pull the elastic strap over the lower
rear of the iron until it its tightly. To release
the soleplate cover, pull the elastic strap and
remove the iron.