Bosch RTM 430, Repair Instructions

Page: 81 / 86

81
6.10 Configure RTM from a file This menu allows you to read country-specific configurations into the RTM’s EEPROM.
i You must set the service switch S3 and then trigger a reset (see Chapter 6.2) in order
to change the settings.
⇓⇓⇓⇓⇓
The changed entries are displayed briefly on the display. After configuration, you return
to the basic menu.
i
If the service switch S3 has not been set, you will see a red-highlighted bar on the
display consecutively showing the adjustment data which cannot be changed.
Entry of the parameter data is independent of switch setting
S3 . This data is
displayed consecutively in a green bar.