5/
28
Bosch Rexroth AG
VT-MSFA1 | RE 30260-B/07.12
About this documentation
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following product:
•
VT-MSFA1-XXX-1X/V0 in the following variants:
•
VT-MSFA1-50-1X/V0 (for KSDER valve with coil 2.3 Ohm at 1.76 A),
mat. no. R901306231
•
VT-MSFA1-100-1X/V0 (for 4SEC6...SO843 valve), mat. no. R901306230
•
VT-MSFA1-150-1X/V0 (for 4WE6...SO893 valve), mat. no. R901306229
This documentation is intended for assemblers, operators and service engineers
and system end-users.
This documentation contains important information on the safe and appropriate
assembly, transport, commissioning, operation, use, maintenance, disassembly
and simple troubleshooting of the product.
f
Read this documentation completely and particularly chapter 2 "Safety instruc-
tions" before working with the product.
1.2 Required and amending documentation
f
The product must not be commissioned until you have been provided with the
documentation marked with the book symbol
and you have understood
and observed it.
Table 1: Required and amending documentation
Title
Document number Document type
Booster amplifier
RE 30260
Data sheet
Capacitor module
RE 30750
Data sheet
Environmental compatibility statement
for the areas EMC, climate and me-
chanical load
RE 30260-U
Environmental
declaration
2/2 directional seat valve, direct oper-
ated with solenoid actuation, type KSDE
RE 18136-23
Data sheet
3/3, 4/2 and 4/3 directional seat valve
with solenoid actuation, type SEC6
RE 22035
Data sheet
4/3, 4/2 and 3/2 directional valve with
wet-pin DC solenoids
RE 23178
Data sheet
Compact power supply unit VT-NE30-2X RE 29929
Data sheet
1.3 Representation of information
Consistent safety instructions, symbols, terms and abbreviations are used so that
you can quickly and safely work with your product using this documentation. For
a better understanding, they are explained in the following sections.
