3
Linear Motion and Assembly Technologies
WARNING!
Please read all assembly and maintenance instruc-
tions carefully before beginning set-up and operation
of the belt grinder.
Where appropriate, warning symbols have been
included in this publication to alert you of potential or
impending danger.
•
Be sure to read and observe all safety warnings in
this document. Failure to do so could result in
potential risks to your health and safety as well as
those around you.
•
Covers and guards have been designed to elimi-
nate pinch points and exposure to moving belts
and pulleys.
DO NOT
operate the belt grinder with
the guards removed. Serious injury may result!
•
All set-up, maintenance, and repair work should
be performed only by properly trained, qualified
personnel. All operators must be properly trained
in the use of this equipment.
•
Always make sure that the switch is in the OFF
position and the power cord is unplugged before
adjusting or servicing.
•
Always be sure that the switch is in the OFF
position before plugging in the belt grinder.
•
To prevent serious injury, never wear loose-fitting
clothing while operating the belt grinder. Long hair
MUST be tied back.
SAVE THESE INSTRUCTIONS!
IMPORTANT SAFETY INFORMATION
