Improper mounting!
Mounting of hydraulic components using
mounting screws of reduced strength, im‐
proper mounting or mounting with insufficient
stability may cause the hydraulic components
to become loose and fall down. Consequent‐
ly, hydraulic fluid may leak and lead to per‐
sonal injuries and/or damage to property.
Heavy hydraulic components may cause
bruises or fatal injury.
WARNING
●
Completely mount hydraulic components according to the mounting
specifications using suitable mounting aids.
●
Mount the Sytronix system at places that are suitable to bear the weight
of the system.
●
Observe the specified mounting and installation notes and observe the
given tightening torques and bolt strengths.
●
Check fixing devices regularly during operation.
Unexpected machine movements!
Working on running systems poses a danger
to life and limb. The work steps described in
these operating instructions may only be per‐
formed on shut down systems. Before begin‐
ning work:
WARNING
●
Make sure that the drive motor cannot be switched on.
●
Make sure that all force-transmitting components and connections (elec‐
trical, pneumatic, hydraulic) are switched off according to the manufac‐
turer’s instructions and are secured against restarting. If possible, re‐
move the main fuse of the system.
●
Make sure that the system is completely depressurized. Please follow
the system manufacturer’s instructions.
●
Only qualified personnel are authorized to install the Sytronix system.
Lines under pressure!
Risk of injury by catapulted components or
plug screws due to breakage of the weakest
system component (e.g. due to missing pres‐
sure relief feature).
WARNING
●
Do not exceed the maximum operating pressure!
●
Limit the pressure in the system by means of overpressure elements.
●
Test the system at test pressure according to ISO 4413.
●
Never disconnect, open or cut pressurized lines!
●
Before carrying out any installation or other work, depressurize the Sy‐
tronix system.
Sytronix SvP 7020 PFC 03 Variable-Speed Positioning of Hy‐
draulic Axes
9/69
Safety instructions
RE 62314-B_Edition 01 Bosch Rexroth AG