background image

12 

Disposal

12.1 

Environmental protection

Careless disposal of the self-contained servo-hydraulic linear axis and the hy‐

draulic fluid may lead to environmental pollution.

Thus, dispose of the product and the hydraulic fluid in accordance with

the national regulations in your country.

Dispose of hydraulic fluid residues according to the applicable safety da‐

ta sheets for these hydraulic fluids.

Observe the following notes for an environmentally friendly disposal of

the self-contained servo-hydraulic linear axis and the drive controller.

12.2 

Return to Bosch Rexroth

The hydraulic products manufactured by us can be returned to us for disposal

purposes at no costs. When returned, the products must not contain any in‐

appropriate foreign substances or third-party components. The components

have to be sent carriage paid to the following address:
Bosch Rexroth AG
Service Industriehydraulik
Bürgermeister-Dr.-Nebel-Strasse 8
97816 Lohr am Main
Germany

12.3 

Packaging

Upon request, reusable systems can be used for regular deliveries.
The materials for disposable packaging are mostly cardboard, wood, and ex‐

panded polystyrene. They can be recycled without any problems. For ecolog‐

ical reasons, disposable packaging should not be used for returning products

to Bosch Rexroth.

12.4 

Materials used

Hydraulic  components  from  Bosch  Rexroth  do  not  contain  any  hazardous

materials that could be released during intended use. In the normal case, no

negative effects on human beings and on the environment have to be expec‐

ted.

12.5 

Recycling

Due to the high metal share, hydraulic products can mostly be recycled. In or‐

der  to  achieve  an  ideal  metal  recovery,  disassembly  into  individual  assem‐

blies is required.

Operating Instructions 

Bosch Rexroth AG

73/91

Self-contained servo-hydraulic linear axis Type SHA...

Disposal

Summary of Contents for Rexroth SHA Series































































































Reviews: