Safety instructions 7/48
RE 22045-XN-B/05.17, M-.SED 10...XN..., Bosch Rexroth AG
Abbreviation
Meaning
IEC
International Electrotechnical Commission
RE
Rexroth document
IP
Ingress protection rating
A, B
Hydraulic connections (actuator)
T
Hydraulic connection (tank)
P
Hydraulic connection (pump)
ANSI
American National Standards Institute
2 Safety instructions
2.1 General information on this chapter
The product has been manufactured according to the generally accepted codes of
practice. However, there is still the danger of personal injury and damage to property
if you do not observe this chapter and the safety instructions in this documentation.
▶
Read this documentation completely and thoroughly before working with
the product.
▶
Keep this documentation in a location where it is accessible to all users at
all times.
▶
Always include the required documentation when you pass the product on to
third parties.
2.2 Intended use
The product is a hydraulic component.
You may use the product as follows:
•
as a direct operated directional seat valve with solenoid actuation for intended use
in explosive atmospheres.
The product is only intended for professional use and not for private use.
Intended use includes having read and understood this documentation completely,
especially chapter 2 "Safety instructions".
The valve is designed and constructed for the control of oil flows. It complies with
the requirements of the EU explosion protection directive 2014/34/EU. According
to directive 2014/34/EU, the device group, category and temperature class/surface
temperature to which the valve corresponds are indicated in the "Area of application"
section of the data sheet.
For information on the device group, category and temperature class/surface
temperature according to the explosion protection directive 2014/34/EU, please
refer to "Data sheet 22045-XN" under "Information on explosion protection" and to the
name plate of the valve.
