About this documentation 5/48
RE 22045-XN-B/05.17, M-.SED 10...XN..., Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
•
M-.SED 10...XN...
This documentation is intended for assemblers, operators, service engineers, system
end-users, machine and system manufacturers.
This documentation contains important information on the safe and proper
assembly, transport, commissioning, operation, use, maintenance, disassembly and
simple troubleshooting of the product.
▶
Read this documentation thoroughly and in particular chapter 2 "Safety
instructions" and chapter 3 "General information on damage to property and
damage to product" before working with the valve.
1.2 Required and amending documentation
▶
The product may not be commissioned until you have been provided with the
documentation marked with the book symbol
and you have understood and
observed it.
Table 1: Required and amending documentation
Title
Document number
Document type
Directional seat valves, direct operated,
with solenoid actuation
22045-XN
Data sheet
General product information on
hydraulic products
07008
Data sheet
Subplates
45100
Data sheet
Declaration of conformity
M.-SED 10...XN...
Document
Refer to the operating
instructions 22045-XN-B
1.3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used to ensure
quick and safe working with the product using this documentation. For a better
understanding, they are explained in the following sections.
1.3.1 Safety instructions
In this documentation, safety instructions are included in chapter 2.6 "Product-
specific safety instructions" and in chapter 3 "General information on damage
to property and damage to product" and whenever a sequence of actions or
instructions is explained which bear the danger of personal injury or damage to
property. The hazard avoidance measures described must be observed.
