Bosch Rexroth IndraDyn MAD100B Rexroth IndraDyn MAD100C, Project Planning Manual

Page: 188 / 276

8.4.4 Terminal box details
① Cover
② Seal
③ Terminal block U-V-W
④ PE connection
⑤ O-ring
⑥ Adapter plate mounting screws
⑦ Safety cover of the cable gland connection thread (for connec‐
tion thread size, see tab. 8-3 "Connection thread of cable gland
at terminal box" on page 176 )
⑧ Adapter plate for cable gland
⑨ Terminal strip (brake, temperature sensor)
⑩ Purging gas connection (only applicable to Ex-type motors)
⑪ Clamping screws for setting the outgoing cable direction (4
pcs.)
Fig. 8-4: Terminal box details
8.4.5 Power connection
Power cable connection at the ter‐
minal box
The required output direction of the power cable is selected in the type code
of the motor. The terminal box is installed at the motor at the factory in com‐
pliance with the selected output direction.
By selection of the connection option "Rotating terminal", the ca‐
ble outlet direction can be adapted any time to new or changed
connection conditions directly at the point of use by simply "rotat‐
ing" the terminal box.
Connecting the power cable to the terminal box requires the following steps:
1.
Open the terminal box cover ①.
Loosen and remove the mounting screws (4 pieces).
178/265
Connection techniques
MAD / MAF Asynchronous Housing Motors
Bosch Rexroth AG R911295781_Edition 11