Bosch Rexroth CytroPac, Operating Instructions Manual

Page: 3 / 84

CytroPac, RE 51055-B/06.17, Bosch Rexroth AG
3/84 Contents
Contents
1 About this documentation 7
1.1 Validity of this documentation 7
1.2 Required and amending documentation 7
1.3 Representation of information 8
1.3.1 Safety instructions 8
1.3.2 Symbols 9
1.3.3 Abbreviations 9
2 Safety instructions 10
2.1 General information on this chapter 10
2.2 Intended use 10
2.3 Improper use 11
2.4 Qualification of personnel 11
2.5 General safety instructions 12
2.6 Product-specific safety instructions 13
2.7 Personal protective equipment 16
2.8 Obligations of the machine end-user 16
3 General information on damage to property and damage to product 17
4 Scope of delivery 19
5 Product information 20
5.1 Performance description 20
5.2 Product description 21
5.3 Component overview 22
5.4 Circuit diagram, hydraulic 23
5.5 Product identification 24
6 Transport and storage 25
6.1 Transporting the hydraulic power unit 25
6.1.1 Preparing for transport 26
6.1.2 Transport using forklifts and similar floor conveyors 26
6.1.3 Transport using lifting gear 27
6.2 Storage of the hydraulic power unit 28
7 Assembly 29
7.1 Unpacking the hydraulic power unit 29
7.2 Installing the hydraulic power unit 29
7.2.1 Dimensions of the hydraulic power unit 30
7.2.2 Fixation of the hydraulic power unit 31
7.3 Hydraulic supply connection 33
7.4 Water supply connection 35
7.5 Electrical interface assignment 36
7.5.1 Mating connector assignment to port 12X1:
Feed-in/voltage supply 36
7.5.2 Mating connector assignment to port 15X1:
Enable signal 24 VDC (M12 x 1, customer side) 37
7.5.3 Mating connector assignment: Filling level/temperature sensor,
filter contamination sensors ("Basic" configuration) 38