manualshive.com logo in svg

Bosch Rexroth CytroPac, Operating Instructions Manual, Page: 28 / 84

Share
Download
Bosch Rexroth CytroPac Operating Instructions Manual Download Page 28

28/84 

Transport and storage

Bosch Rexroth AG

, CytroPac, RE 51055-B/06.17

6.2  Storage of the hydraulic power unit

 

▶

Store the hydraulic power unit in a dry location at constant temperature and in its 
original packaging if possible. 
Ideal storage temperature: +5 °C to +25 °C

 

▶

Provide for 100 % UV protection.

 

▶

Store the hydraulic power unit protected against shocks.

 

▶

Store the hydraulic power unit in an upright position.

 

▶

Make sure that the cover of the hydraulic power unit is closed during storage.

The maximum storage time of the hydraulic power unit is 12 months.

If the storage time exceeds 12 months, check the function of the hydraulic power 
unit and flush it with suitable cleaning liquid prior to commissioning.  
Carry out the flushing procedure as described in chapter 8.1.6 "Flushing the 
hydraulic system".

Storage conditions

Maximum storage time

Summary of Contents for Rexroth CytroPac





















































































Reviews:

No comments