Bosch rexroth CytroForce-M Operating Manual Download Page 19

Page: 19 / 85

19 / 85

Servo-hydraulic actuator

Bosch Rexroth AG

RE62270-B, 01.21

Scope of delivery

The scope of delivery of the servo-hydraulic actuator includes:

Mechanics

●

A servo-hydraulic drive unit (consisting of actuator, motor/pump group and

manifold block)

Electrics

●

A drive controller of series HCS including firmware

●

A power and encoder cable

●

Electrical safety components (optional)

●

As well as accessories (choke, mains filter...)

Software

●

Technology function PFC (provided on microSD card)

Extended scope of delivery:
In the variant “safety-capable axis” the scope of delivery of the servo-hydraulic

actuator is extended by additional safety components, see also

⮫

Chapter 5.1.8

“Functional safety” on page 27.
For the exact scope of delivery of the servo-hydraulic actuator ordered by you,

please refer to your order confirmation.

●

Check the scope of delivery for completeness.

●

Inspect the scope of delivery for any transport damage, see

⮫

Chapter 6

“Transport and storage” on page 33.

In case of complaints, please contact Bosch Rexroth AG, see

⮫

Chapter 16.1

“Service and support” on page 77.

Summary of Contents for rexroth CytroForce-M






















































































Search results

Summary of Contents for rexroth CytroForce-M

Reviews:

Related manuals for rexroth CytroForce-M

Brands by name

Popular brands

Bosch rexroth CytroForce-M, Operating Manual

Search results

Summary of Contents for rexroth CytroForce-M

Reviews:

Related manuals for rexroth CytroForce-M

Brands by name

Popular brands