manualshive.com logo in svg

Bosch rexroth BS 2/G-250, Assembly Instructions Manual

Share
Download
Bosch rexroth BS 2/G-250 Assembly Instructions Manual Download Page 69

 

Maintenance and repair 69/84

 

3 842 564 989/2022-06, MIT: HQ 2/G-H, BS 2/G-250, 

Bosch Rexroth AG

 HQ 2/C-H, change flat top chain

Fig. 46: 

564988-72

1

1

SW4 

SW3

3

2

2

4

4

3

3

3

A

HQ 2/C-H

Preparing to replace the chain (flat top chain)

 Please note:

To replace the flat top chain, 
belt section BS 2/CH-HQ2 for 
the transverse conveyor of the 
lift unit must be removed.

Required tools

 

• Hex socket wrench, size 3

 

• Hex socket wrench, size 4

Preliminary steps

Allow the belt section to run 
briefly and position the flat-top 
plate with hole (A, chain lock 
position) on the drive sprocket.

 

„

Now deenergize and 
depressurize the system, 
and secure it against being 
reactivated.

1. 

Remove the headless 
setscrew of the belt 
section locking mechanism.

2. 

Remove the belt section to 
the top.

3. 

Remove the covers from 
the drive heads.

4. 

Remove the cover sheets 
from the chain tensioners.

EN

GLISH

Summary of Contents for rexroth BS 2/G-250





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands