10/94 Safety instructions | Automax 100 | Extension module TS-AC E2-M3-1X
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
Lux is recommended in the classification for „training institutions“ for training workshops,
exercise rooms and laboratories.
The criteria of the following list must also be taken into consideration.
Prevention of blinding
Sufficient evenness of indoor lighting
Low shading
Suitable light color
–
Color temperature of 4000 Kelvin is regarded to be suitable. This is neutral white. To
generate artificial daylight, a light color of approx. 6000 Kelvin can also be used. This
light, however, has a light shade of blue and is not considered as pleasant by
everyone
The height of the worktable must be selected in such a way that ergonomic working is
possible. To ensure stability of the basic module, a minimum distance of 10 cm should be
ensured to the worktable edge in all sides. The spatial arrangement of the worktable may
vary depending on the task.
For example, the rear and sides of the working table may also end at the wall in an office. In
this case, the distance must only be ensured behind the operator. In general, an open
escape path to an emergency exit must be ensured.
Basic module with extension module
Workstation (Worktable)
Space requirement of one workstation (dimensions in cm)
Furthermore, rows of tables can also be formed in a training room. If the table width is
sufficient, the tables may then also be lined up directly at the sides. If several rows of tables
are in place, a passage width of 100-200 cm must be ensured between the table rows.
Escape routes to emergency exits must be reached from all workstations. No cables should
be routed on the ground in the passages. If this is not possible, the cables must be covered
with suitable cable ducts or similar. This hazard area is marked by the „Tripping hazard“
warning sign. Please refer to table „
Warning signs according to DIN EN ISO 7010 (2019)
“ as
of page [
Summary of Contents for rexroth Automax 100
Page 101: ......
