manualshive.com logo in svg

Bosch R911274804, Project Planning Manual

Share
Download
Bosch R911274804 Project Planning Manual Download Page 53

MKE

DOK-MOTOR*-MKE*******-PRJ1-EN-E1,44 

•

 06.97

Storage , Transport and Handling  

9-1

9 

Storage , Transport and Handling

9.1 

Notes on the packaging

Notes on storage, transport and handling are on the packaging. Please
comply with the instructions.

Fig. 9-1: Notes on storage, transport and handling on the packaging

9.2 Storage

WARNING

Motor damage and forfeiture of guarantee!
Motors not properly stored could be damaged. The gua-

rantee is also forfeited in this case.

⇒ 

Please therefore note the following instructions.

Maintain the following conditions during storage:

⇒ 

permissible temperature range: -20

°

 C to +80

°

 C.

⇒ 

motors must be stored dry, dust-free and shock-free

⇒ 

motors must be stored horizontally

⇒ 

Protective cover of plastic on the drive shaft must not be removed. It
protects against moisture and mechanical damage.

Summary of Contents for R911274804













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands