Number
Element
Description
9 CONTROL IN/OUT port
Control port with analog/logic inputs, high
power outputs and pins for DCF77 or slave
clocks.
10 CAN BUS port
Port for connecting power amplifiers or routers.
11 ETHERNET port with status
indicator lights
Port for connecting to a PC or other network
devices.
12 Reset button
Reset of the device: Briefly press this button to
reset the device.*
13 CONTROL IN port
Control port with isolated or supervised inputs.
14 CONTROL OUT port
Control port with open collector outputs.
15 AMP IN port
Input for 100 V (or 70 V) audio signal from power
amplifier.
16 SPEAKER OUT port
Output for speaker zones.
* If the reset button is pressed too long (e.g. > 4 seconds), the device enters the service
mode. Press the reset button again to exit the service mode.
12
en | System overview
PAVIRO Controller
08-May-2017 | 04 | F01U306900
Operation manual
