Bosch PSR 10, Original Instructions Manual

Page: 30 / 217

2 609 005 103 | (18.4.11) Bosch Power Tools
30 | English
11
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
14.03.2011
Assembly
Battery Charging (see figure A)
f
Do not use other battery chargers. The supplied battery charger is
designed for the Lithium-Ion battery in your machine.
f
Observe the mains voltage! The voltage of the power supply must
correspond with the data given on the nameplate of the battery charg-
er. Battery chargers marked with 230 V can also be operated with
220 V.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery in the battery charger before
using your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its
service life. Interrupting the charging procedure does not damage the bat-
tery.
The lithium-ion battery is protected against deep discharging by the “Elec-
tronic Cell Protection (ECP)”. When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer
rotates.
Do not continue to press the On/Off switch after
the machine has been automatically switched
off. The battery can be damaged.
The battery is equipped with a NTC temperature control which allows
charging only within a temperature range of between 0 °C and 45 °C. A
long battery service life is achieved in this manner.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
WARNING
OBJ_BUCH-1400-001.book Page 30 Monday, April 18, 2011 9:02 AM