Bosch Professional GCM 10 GDJ, Original Instructions Manual

Page: 21 / 105

English | 21
(46) Locking screw for the adjustable fence
(47) Damper
(48) Set screws for damping
(49) Holes for screw clamp
(50) Threaded rod
(51) Angle indicator for mitre angles
(52) On/off switch
(53) Screws for insert plate
(54) /
(55) /
(56)
Set screws for 0° basic setting (bevel angle)
(57) Set screw for 45° basic setting (left-hand bevel
angle)
(58) Set screw for 45° basic setting (right-hand bevel
angle)
(59) Set screws for mitre angle scale
(60) Screw for mitre angle indicator
(61) Set screw for adjusting the clamping force of the
clamping handle for any bevel angle
(62) Hook-and-loop strap
Technical Data
Sliding mitre saw GCM 10 GDJ GCM 10 GDJ
Article number 3 601 M27 04.
3 601 M27 0L.
3 601 M27 08.
3 601 M27 0B.
3 601 M27 0K.
3 601 M27 00.
3 601 M27 03.
3 601 M27 06.
3 601 M27 07.
Rated power input W 2000 2000
No-load speed min
-1
5000 5000
Starting current limitation ● ●
Weight according to EPTA-Procedure 01:2014 kg 31.6 31.6
Protection class
/ II / II
Dimensions of suitable saw blades
Saw blade diameter mm 254 254
Base blade thickness mm 1.7–2.6 1.7–2.6
Max. cutting width mm 3.2 3.2
Hole diameter mm 25.4 30
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Permitted workpiece dimensions (maximum/minimum): (see "Permissible workpiece dimensions", page 26)
Assembly
u
Avoid starting the power tool unintentionally. The
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
Items Included
See the list of items included at the start of
the operating manual.
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
– Sliding mitre saw with mounted saw blade
(34)
– Locking knob (11)
– Clamping handle (13) with fastening set
– Extension bar (16) and clamping lever (18) with fasten-
ing set
– Dust bag (1)
– Hex key (30)
– Screw clamp (19)
Note: Check the power tool for possible damage.
Before continuing to use the power tool, carefully check that
all protective devices or slightly damaged parts are working
perfectly and according to specifications. Check that the
moving parts are working perfectly and without jamming;
check whether any parts are damaged. All parts must be fit-
ted correctly and all the conditions necessary to ensure
smooth operation must be met.
If the protective devices or any parts become damaged, you
must have them properly repaired or replaced by an author-
ised service centre.
Extra tools required (not included in the delivery):
– Cross-headed screwdriver
– Ratchet spanner (size: 8 mm)
Bosch Power Tools 1 609 92A 5PA | (18.09.2020)