8
Robert Bosch Hausgeräte GmbH
en
Application
General
The gentle oscillations and the bubbling
water relax muscles and reinvigorate tired
feet. The attachments supplied pamper and
massage the feet.
Each individual application (Level 1 – 3)
should not last more than 10 minutes.
The foot bath can be used with or without
water.
Sit down during use, and under no
circumstances stand up with your feet
in the spa!
The appliance is not designed to take the
full weight of the user.
Use
The appliance must not be connected to the
power supply during filling or emptying.
● Uncoil the lead and place the foot spa on
the floor in front of a chair.
● Check whether the appliance is switched
off. The rotary selector
5
must be set
to “0”.
● Fill with warm water to the
~
marking.
● Plug in the power cord.
● Sit down and place the feet in the foot
bath
1
, ensuring you are in a comfortable
position.
● Select the desired level from 1 – 3 with the
rotary selector
5
and pamper your feet
(max. period of use approx. 10 min).
– Level 1
m
switches on the vibration
massage.
– Level 2
n
starts the bubble function,
and switches on the heating to keep the
water warm. It is not possible to heat up
cold water by this method.
– Level 3
mn
combines levels
1 and 2.
● Switch off the appliance when you have
finished bathing your feet. To switch off
the appliance, set the rotary selector
5
to “0”.
● Remove the feet from the foot bath and
unplug the lead. Lift the appliance by the
indented grips
2
and pour out the water
via the cutout at the front.
Tip:
To ensure special relaxation and care
for the feet, a non-foaming, non-oily care
preparation can be added to the water.
Use of accessories
● Affix the desired attachment
a
,
b
or
c
to
the drive socket
6
.
● Press down the affixed attachment lightly
with a foot. The attachment rotates.
Important:
Do not prevent rotation
through excessive pressure.
● Treat the particular part of the foot with
the appropriate attachment.
– The soles of the feet can be massaged
using the massage brush
a
and the
massage ball attachment
b
.
– The “pumice stone” attachment
c
is suitable for the gentle removal of
hardened skin.
Tip:
Flakes of dead skin can be readily
removed with the “pumice stone” after a
foot bath, when the skin is very soft.
