Bosch PKY475N14W, Instruction Manual

Page: 16 / 20

16
Tips and tricks
■
When the heating up light goes off, place the food on the
appliance. This also applies when raising the temperature to fry
a second item which requires a higher setting.
■
Press the pieces of meat, poultry or fish flat onto the frying
surface using the spatula. Only turn the meat, when it comes
away from the surface easily, in order to protect the structure of
the meat. Damaging the structure can cause juices to escape
and results in the meat drying out.
■
Keep the pieces of meat, poultry or fish apart so that they do not
draw any liquid.
■
Avoid pricking or cutting meat before or during frying, in order to
retain meat juices.
■
Do not salt the food before frying, to prevent liquid and soluble
nutrients from escaping.
■
Turn fish fillets in flour before frying. The fish will be easier to
turn.
■
Turn fish fillets only once if possible. Place fish onto the
appliance with the skin facing downward.
■
Use oil and fat that is suitable for frying, for example plant oil or
concentrated butter.
Timer
The timer can be used as a kitchen timer. The timer does not
switch the Teppan Yaki on or off.
With the timer, you can set a time up to 99 minutes. You can also
use the timer when the Teppan Yaki is switched off.
Setting procedure
1.
Touch the U symbol until the U indicator lights up.
‹‹ lights up on the timer display.
2.
Set the desired time in the settings range.
A signal sounds once the time has elapsed. ‹‹ lights up on the
timer display. The display switches off after 10 seconds.
To correct the time, touch the
U symbol and set the time again in
the settings range. To switch the timer off prematurely, set the
time to 0.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Changing the basic settings
The Teppan Yaki must be switched off.
1. Switch on the Teppan Yaki.
2.
Within the next 10 seconds, touch the U symbol for 4 seconds.
™ƒ flashes in the left-hand display and ƒ appears in the right-
hand display.
3.
Touch the U symbol repeatedly until the desired indicator
flashes in the left-hand display.
4.
Set the desired value on the settings range.
5.
Touch the
U
symbol for 4 seconds.
The setting is saved.
Switching off without saving
To exit the basic setting, switch the Teppan Yaki off with the main
switch. Changes are not saved.
Display Function
™ƒ
Audible signal
‹
Confirmation signal and operation error signal are
switched off.
‚ Only the operation error signal is switched on.
ƒ Confirmation signal and operation error signal
switched on.*
™‡ Duration of the timer end signal
‚ 10 seconds.*
ƒ n
30 seconds.
„ 1 minute.
™ˆ Combination of heating zones
‹ Both heating zones are on when the appliance is
switched on.
‚ Both heating zones are off when the appliance is
switched on.
ƒ
The last setting made is retained when the
appliance is switched on.*
™‹
Reset to basic setting
‹
Switched off.
‚ Switched on.
* Basic setting