Bosch OptiMUM Series, Instruction Manual

Page: 27 / 178

27
en Parts and operating controls
Tools
X Fig.
A
Professional flexible
beating whisk
For stirring dough, e.g. cake
mixture or mousse. For folding in
cream or beaten egg white.
Professional stirring whisk
For beating egg white, whipping
cream and stirring light dough, e.g.
sponge mixture.
Kneading hook
For kneading heavy dough (e.g.
yeast dough) and for folding
in ingredients which are not
supposed be chopped (e.g. raisins,
chocolate chips).
Recommended speeds
z
For folding in and mixing different
ingredients gently (e.g. folding in
beaten egg white)
1-2
For stirring and mixing ingredients
3 For kneading heavy dough with
the kneading hook
5-7 For stirring and whipping
ingredients (e.g. whipped cream)
with the professional flexible
beating whisk or the professional
stirring whisk
ü
For using the tools with
SensorControl Plus X “Using
SensorControl Plus” see
page 31
Re-adjustment of tools
The appliance is factory-set so the
professional stirring whisk almost touches
the bottom of the bowl to ensure that
ingredients are mixed together perfectly. If
the tools touch the bottom of the bowl or
are too far from it, the gap can be easily
corrected. X
“Re-adjustment of tools” see
page 36
Swivel arm
X Fig.
C
The swivel arm is moved up to
insert or to remove a tool or the
bowl. The swivel arm features an “EasyArm
Lift” function, which supports the upward
movement of the swivel arm.
Bowl and cover
X Fig.
D
The appliance comes with a special bowl,
which is securely attached to the base unit
through insertion and rotation. The cover
is secured to the swivel arm and opens
automatically when the swivel arm is raised.
Inserting and removing tools
X Fig.
E
The tools are equipped with a lever on the
protective cap, designed to make them
easy to remove.
Insert tool: Align the lever with the front
and insert the tool in the main drive until it
locks into place. The drive is then covered
by the protective cap.
Remove tool: Press the lever on the
protective cap down until the tool is
released. Take the tool out of the drive.
Cable reel
X Fig.
A
Depending on the model: The
appliance is equipped with an
automatic cable reel. Pull out the power
cord in one go to the required length (max.
125 cm) and slowly release; the cord is
locked.
Reduce cable length: Pull gently on the
cord and allow it to wind up to the required
length. Then gently pull the cord again and
slowly release; the cord is locked.
Important!
Do not push the cord in by hand. If the cord
jams, pull out the cord all the way and then
allow it to wind up again.