en
Appliance door
26
■
The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Removing panels
1.
Open the appliance door fully.
2.
Open the two locking levers on the left and right
(fig.
!
).
3.
Close the appliance door fully
‚
. Take hold of the
appliance door with both hands, one on the left and
one on the right
ƒ
, and pull it up and out (fig.
"
).
4.
Set the appliance door down carefully on a level
surface.
5.
Press the left- and right-hand sides of the cover
(fig.°
#
).
6.
Remove the cover (fig.
$
).
7.
Lift out the outer panel (fig.
%
) and set it down
carefully on a flat surface.
8.
Lift out the inner panel (fig.
&
) and set it down
carefully on a flat surface.
Clean the panels with glass cleaner and a soft cloth.
:
Warning
Risk of injury!
■
Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■
The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
1.
Slide each inner panel back in and make sure that
the number on the inner panel is to the bottom right
(fig.
!
).
2.
Ensure that the inner panel is in the bottom right of
the retainer (fig.
"
).
3.
Push the inner panel in
at the top (fig.
#
).
4.
Place the outer disc on the seal
‚
(Fig.
$
).
5.
Slide the outer panel back in and make sure that it is
sitting correctly at the bottom in the retainer (fig.
%
).
2
E
E
D
1
2
1
D
D
