Rails
en
23
1.
First, push the shelf support into the middle of the
rear socket
‚
until the shelf support rests against the
cooking compartment wall, and then push it back
ƒ
(fig.
!
).
2.
Then push the shelf support into the front socket
„
until the shelf support also rests against the cooking
compartment wall, and then press it downwards
…
(fig.
"
).
Fitting and removing the pull-out rails
On appliance models with shelf supports, you must
change the basic settings to "Telescopic rails: Yes".For
more information, refer to the "Basic settings" section.
If necessary, you can use pull-out rails on all levels.
If your appliance features the EcoClean Direct cleaning
function, you will need to take the entire shelf supports
for fitting and removing the pull-out rails out of the
cooking compartment. Otherwise, the EcoClean Direct
coating may be damaged.
If your appliance features the pyrolytic self-cleaning
function, you will need to take the pull-out rails out of
the cooking compartment before running the cleaning
function.The pull-out rails are not suitable for pyrolytic
self-cleaning.
Notes
■
Only use the pull-out rails in conjunction with the
universal pan, baking tray, wire rack and
accessories that are placed on the wire rack. All
other accessories are unsuitable.
■
The pull-out rails are not suitable for appliances with
a microwave function.
:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Removing the pull-out rails
1.
Push on the tab marked "PUSH" behind the end of
the rail, and push the rail away from you (fig.
!
).
2.
Keep the "PUSH" tab pushed back and swing the rail
out (fig.
"
).
3.
Pull the rail out towards you until the retainer at the
back unhooks (fig.
#
).
4.
Remove the pull-out rail (fig.
$
).
Use washing-up liquid and a sponge to clean the pull-
out rails. For stubborn dirt deposits, use a brush.
Fitting the pull-out rails
The rails are designed to fit on either the right- or the
left-hand side (not both).Make sure when you fit them
that you can pull them out towards you.
1.
The rail must sit between the two bars (fig.
!
).
G
F
2
E
D
1
1
2
I
1
