6
Operation
en
Operation
Warning!
The bottom of the receptacle which you use
must not have any bumps or recesses.
■ Before using the appliance for the first
time, clean all parts of it.
Blender foot
The blender foot is suitable for blending
mayonnaise, sauces, mixed drinks, baby
food, cooked fruit and vegetables. For
puréeing soups. It is recommended to use
the supplied blender jug. However, other
suitable receptacles can also be used.
Figure
B
:
■ Completely unwind the power cord.
■ Place the blender foot on the base unit
and lock into position.
■ Insert the mains plug.
■ Place food in the blender jug or another
tall receptacle.
Info:
The appliance works better if there is
some liquid in the ingredients.
■ Set the required speed with the speed
control
(Fig.
B
-5)
.
It is recommended to use a low speed
setting for liquids, hot food and for mixing
(e.g. muesli in yoghurt).
The high speed settings are recom-
mended for the processing of more solid
foods.
■ Firmly hold the hand blender and jug.
■ Switch on the hand blender by pressing
the required
ON
button.
Info:
When switching on the hand blender,
hold it at a slight angle to prevent it from
“sticking” to the bottom of the blender jug.
The hand blender remains switched on as
long as the
ON
button is pressed.
Info:
To prevent the ingredients from
splashing, do not press the
ON
button until
the blender foot has been immersed in the
ingredients. Always switch off the hand
blender before taking it out of the processed
food.
■ Release the
ON
button after processing.
After using the appliance:
■ Remove mains plug.
■ Press the release buttons and remove
the blender foot from the base unit.
Whisk
The whisk is suitable for whipping cream,
beating egg whites and milk froth (from hot
(max. 70 °C) and cold milk (max. 8 °C)) as
well as for preparing sauces and desserts.
W
Risk of scalding!
When processing hot milk, use a tall, narrow
receptacle for blending. Hot milk may splash
and scald you.
Figure
C
:
■ Put ingredients into the blender jug.
■ Place the gear attachment on the base
unit and lock into position.
■ Insert the whisk into the gear attachment
and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment
(Fig.
C
-3)
.
■ Insert the mains plug.
■ Set required speed using the speed
control (recommendation: high speed).
■ Grip base unit and blender jug and press
required
ON
button.
■ Release the
ON
button after processing.
After using the appliance:
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the gear attachment.
■ Remove the whisk from the gear
attachment.
Multifunction accessory
The multifunction accessory is suitable for
cutting and shredding food.
W
Risk of injury from sharp blades /
rotating drive!
While the appliance is operating, never place
fingers in the mixing bowl. Always use the
pusher for adding ingredients.
After switching off, the drive continues
running for a short time. Change tools only
when the drive is at a standstill.