4
For your safety
en
Do not use the appliance if the power cord and / or appliance are
damaged. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
Before replacing accessories or additional parts, which move during
operation, switch off the appliance and disconnect from the power
supply.
Safety instructions for this appliance
A
Risk of injury
A
Electric shock risk
Do not use the hand blender with damp hands and do not operate it
at no load.
Do not immerse the appliance in liquid above the blender foot-base
unit connection point. Never immerse the base unit in liquids and do
not clean in the dishwasher. Caution when processing hot liquids.
Liquids may splash during processing.
Never place blender foot on hot surfaces or use in very hot food.
Leave hot food to cool down to at least 80 °C before processing with
the blender! Before using the hand blender in a cooking pot, take the
pot off the hotplate.
A
Risk of injury from sharp blades / rotating drive!
Before replacing accessories or additional parts, which move during
operation, switch off the appliance and disconnect from the power
supply.
Never grip the blade in the blender foot. Never clean the blades with
bare hands. Use a brush. Never grip the blades of the universal
blade. Grip the universal blade by the edge of the plastic handle only.
Exercise particular caution when handling the attachments!
Note shape and location of the insert when inserting it into the carrier
disc. Take hold of carrier disc by the designated recessed grips only.
Do not place fingers in the feed tube. Only use the pusher when
adding more ingredients.
When working with the multifunction accessory, the base unit may
be switched on only when the lid has been attached and screwed on
tight. Do not touch blade with bare hands. Clean them with a brush.
A
Important!
Operate the hand blender with original accessories only. Do not
attach or remove accessories until the base unit is at a standstill.