MON172CL20
Installing the MON172CL20 | en
7
Bosch Security Systems, Inc.
Instruction Manual
F01U064552 | 1.0 | 2007.02
4.1.3
Extension Cable Installation
Use the Extension Cable (included with the MON172CL20) to place the power supply/base
unit up to 1.5 m (5 ft) from the LCD panel for wall mount or rack mount installations.
1.
Follow the instructions in
Section 4.1.2: Wall Mount Installation
to remove the power sup-
ply/base from the LCD panel section.
2.
Attach the power supply extension cable by connecting one end of the extension cable
(large connector) to the power supply/base, as shown in
Figure 4.4
on page 7.
Fig. 4.4
Attaching the Power Supply
3.
Connect the other end of the extension cable (small connector) to the power input con-
nector on the rear side of the LCD panel, as shown in
Figure 4.5
on page 7.
Fig. 4.5
Connecting the Power Input
4.
Connect the appropriate ends of the IEC power cord to the power source (mains) and
power supply/base unit.
5.
Toggle the power switch on the base to the ON position.
