6
en | Installing the MON172CL20
MON172CL20
F01U064552 | 1.0 | 2007.02
Instruction Manual
Bosch Security Systems, Inc.
2.
Remove the power bayonet connector from the panel (see
Figure 4.2
on page 6), while
sliding the base off the monitor.
Fig. 4.2
Removing the Power Bayonet
3.
Mount the unit to the mounting device (not provided) using the four (4) mounting holes
on the rear panel. The square mounting hole patterns are standard on 100 mm (3.9 in.)
centers, as shown in
Figure 4.3
on page 6.
Fig. 4.3
Mounting the Device
